Tripp-lite B051-000 Instrukcja Użytkownika Strona 6

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 8
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 5
IP Address Determination
IP Installer
Ifyouareanadministratorlogginginforthersttime,youneedtoaccesstheB051-000in
ordertogiveitanIPaddressthatuserscanconnectto.Therearethreemethodstochoose
from;IPInstaller,BrowserorAPWindowsClient.Ineachcase,thecomputeryouare
usingtoaccesstheB051-000mustbeonthesamenetworksegmentastheunit.Afteryou
haveconnectedandloggedinyoucangivetheB051-000itsxednetworkaddress.
Note: The default username is administrator and the default password is password. It is strongly recommended
that you change these upon accessing the unit for the first time.
ForcomputersrunningWindows,an
IPaddresscanbeassignedwiththeIP
Installerutility:
1.UnzipthecontentsofIPInstaller.zip
(foundontheCDthatcamewiththe
B051-000)andsavethemtoadirectory
onyourharddrive.
2.Gotothedirectoryandrunthe
IPInstaller.exe.Adialogboxsimilarto
theonebelowappears:
WhentheIPInstallermainwindowcomes
up,theutilityscansthenetworkforB051-
000devicesandliststheonesitndsinthe
Device List Panel. The Device List Panel
consistsofthreecolumns,asshowninthe
followingtable:
Item Description
Model Name The device’s model name (B051-000).
MAC Address The MAC address of the device.
IP Address The current IP Address of the device.
3.SelecttheB051-000fromtheDevice List.
• IfthereismorethanoneB051-000,usetheMACaddresstondtheunitthatyouwant.
TheMACaddresscanbelocatedonthebottomoftheunit.
• Ifthelistisempty,ortheB051-000doesnotappear,clickEnumerate to refresh the
DeviceList.
Note: The NetworkAdapter drop-down list pertains to computers that have more than one network adapter
installed. Users should select the network adapter that they want the Enumerate signal to be sent to.
4.OnceyouhaveselectedthedesiredB051-000,youmustchoosewhetheryouwantto
Obtain an IP address automatically (DHCP) or Specify an IP address.Ifyouchoose
thelatter,llintheIPAddress,SubnetMask,andGatewayeldswiththeinformation
appropriatetoyournetwork.
5.ClickSet IP.
6.OncetheIPaddressshowsupintheDeviceList,clickExit.
200909082 93-2851.indd 6 10/27/2009 3:41:21 PM
Przeglądanie stron 5
1 2 3 4 5 6 7 8

Komentarze do niniejszej Instrukcji

Brak uwag